Co-conception contrôle / communication pour économiser l'énergie dans les systèmes commandés en réseau sans fil

Energy is a key resource in Networked Control Systems, in particular in applications concerning wireless networks. This thesis investigates how to save energy in wireless sensor nodes with control and communication co-Design. This thesis reviews existing techniques and approaches that are used to save energy from a communication and a control point of view. This review is organized according to the layered communication architecture covering from bottom to top the Physical, Data Link, Network, and Application layers. Then, from the conclusion that the radio chip is an important energy consumer, a joint radio-Mode management and feedback law policy is derived. The radio-Mode management exploits the capabilities of the radio chip to switch to low consuming radio-Modes to save energy, and to adapt the transmission power to the channel conditions. This results in an event-Based control scheme where the system runs open loop at certain time. A natural trade-Off appears between energy savings and control performance. The joint policy is derived in the framework of Optimal Control with the use of Dynamic Programming. This thesis solves the optimal problem in both infinite and finite horizon cases. Stability of the closed loop system is investigated with Input-To-State Stability framework. The main conclusion of this thesis, also shown in simulation, is that cross-Layer design in Networked Control System is essential to save energy in the wireless nodes.L'énergie est une ressource clé dans les systèmes commandés en réseau, en particulier dans les applications concernant les réseaux sans fil. Cette thèse étudie comment économiser l'énergie dans les capteurs sans fil avec une co-Conception contrôle et communication. Cette thèse examine les techniques et les approches existantes qui sont utilisées pour économiser l'énergie d'un point de vue de la communication et du contrôle. Cet étude est organisée selon une architecture de communication par couches couvrant de bas en haut les couches Physique, Liaison, Réseau, et Application. Puis, à partir de la conclusion que la puce radio est un important consommateur d'énergie, une loi conjointe de gestion des modes radio et de contrôle en boucle fermée est établie. La gestion des modes radio exploite les capacités de la puce radio à communter dans des modes de basses consommation pour économiser l'énergie, et d'adapter la puissance de transmission aux conditions du canal. Il en résulte un système de contrôle basé sur des événements où le système fonctionne en boucle ouverte à certains moments. Un compromis naturel apparaît entre l'économie d'énergie et les performances de contrôle. La loi conjointe est établie avec une formulation de contrôle optimal utilisant la Programmation Dynamique. Cette thèse résout le problème optimal dans les deux cas d'horizon infini et fini. La stabilité du système en boucle fermée est étudiée avec la formulation Input-To-State Stability (ISS). La principale conclusion de cette thèse, également illustrée dans la simulation, est que la conception à travers différentes couches dans les systèmes commandés en réseau est essentielle pour économiser l'énergie dans les noeuds sans fil

Energy-aware wireless networked control using radio-mode management in the case of a finite horizon

Energy efficiency is one of the main issues in wireless Networked Control Systems. The control community has already shown large interest in the topics of intermittent estimation and control, allowing to turn off the radio of the nodes which is the main energy consumer. While the existing literature only addresses policies using two radio-modes (ON/OFF), this paper considers intermediate radio-modes (\eg IDLE), which consume less energy than the ON mode and offer better reactivity than the OFF mode, but introduce transition costs. The objective of the paper is to discuss the relevance and benefit to use low consuming radio-modes and to propose a mode switching policy to perform a trade-off between energy savings and performance of the control application in the case where we have a finite horizon. We propose two possible algorithms which solve this using dynamic programming, and then test them with an example of an application.La consommation d'énergie est l'un des principaux problèmes dans les Systèmes de Contrôle en Réseaux. La communauté de contrôle a déjà montré beaucoup d'intérêt pour les estimations et contrôles intermittents, en permettant d'éteindre la radio qui est le composant qui consomme le plus. La littérature existante n'adresse que les systèmes avec deux modes (ON,OFF).Ce papier considère des modes intermédiaires (\eg IDLE), qui consomment moins d'énergie que ON et offrent une meilleure réactivité que OFF, mais qui introduit des coups de transition. L'objectif de ce papier est d'étudier les effets et les avantages d'utiliser des modes intermédiaires et de proposer une méthode pour décider quand changer de mode pour avoir un On propose deux algorithmes qui résolvent ce problème et ensuite on les teste avec un exemple d'une application

FeedNetBack - D05.04 - Design methodologies for event-based control systems

This is a Deliverable Report for the FeedNetBack project (www.feednetback.eu). Networked Control Systems (NCS) are systems in which the sensors or/and the actuators communicate with the controller through a network. Energy saving and robustness to unreliable channels are major challenges in networked control, notably in wireless scenarios. Energy efficiency and in particular asynchronous design methodologies are studied in this deliverable. The presence of a channel between the sensors measuring the plant and the controller generating the control inputs implies that the measurements should be quantized. As a preliminary step, the problem of finding a stabilizing policy with quantized measurements and bounded control inputs is considered. It is common to assume that the different nodes of a Network Control System use a periodic synchronized clock, this simplifies the model which may take into account some transmission delays. However, this assumption is strong and energy consuming. Indeed, the periodic sampling time is often chosen to ensure given performance in the worst case scenario, wasting energy when the system is running around its working point. To relax the assumption of synchronized nodes, the rest of the deliverable introduces two asynchronous design methodologies, event-based and self-triggered methodologies. The former consists in limiting the transmissions between the nodes when a given condition holds, or, in other words, when an event occurs. Not only this approach relaxes the assumption of synchronized nodes, but it also limits the transmissions which save energy. In the following, event-based approach is applied to a feedback control case and an estimation case. However, by its nature, event-based approach forces the communicating node to watch for the occurrence of the triggering event. This is relaxed in self-triggered approach where each node decides, at the end of an action (e.g. measuring, transmitting, controlling), when the next action will take place. In between these times, the node usually goes to down mode to save energy. In the last part of this deliverable, this approach is applied to a variable sample rate control and to the case of IEEE 802.15.4 protocol

Pervasive gaps in Amazonian ecological research

Biodiversity loss is one of the main challenges of our time,1,2 and attempts to address it require a clear un derstanding of how ecological communities respond to environmental change across time and space.3,4 While the increasing availability of global databases on ecological communities has advanced our knowledge of biodiversity sensitivity to environmental changes,5–7 vast areas of the tropics remain understudied.8–11 In the American tropics, Amazonia stands out as the world’s most diverse rainforest and the primary source of Neotropical biodiversity,12 but it remains among the least known forests in America and is often underrepre sented in biodiversity databases.13–15 To worsen this situation, human-induced modifications16,17 may elim inate pieces of the Amazon’s biodiversity puzzle before we can use them to understand how ecological com munities are responding. To increase generalization and applicability of biodiversity knowledge,18,19 it is thus crucial to reduce biases in ecological research, particularly in regions projected to face the most pronounced environmental changes. We integrate ecological community metadata of 7,694 sampling sites for multiple or ganism groups in a machine learning model framework to map the research probability across the Brazilian Amazonia, while identifying the region’s vulnerability to environmental change. 15%–18% of the most ne glected areas in ecological research are expected to experience severe climate or land use changes by 2050. This means that unless we take immediate action, we will not be able to establish their current status, much less monitor how it is changing and what is being lostinfo:eu-repo/semantics/publishedVersio

7th Drug hypersensitivity meeting: part two

No abstract availabl

Elective cancer surgery in COVID-19-free surgical pathways during the SARS-CoV-2 pandemic: An international, multicenter, comparative cohort study

PURPOSE As cancer surgery restarts after the first COVID-19 wave, health care providers urgently require data to determine where elective surgery is best performed. This study aimed to determine whether COVID-19–free surgical pathways were associated with lower postoperative pulmonary complication rates compared with hospitals with no defined pathway. PATIENTS AND METHODS This international, multicenter cohort study included patients who underwent elective surgery for 10 solid cancer types without preoperative suspicion of SARS-CoV-2. Participating hospitals included patients from local emergence of SARS-CoV-2 until April 19, 2020. At the time of surgery, hospitals were defined as having a COVID-19–free surgical pathway (complete segregation of the operating theater, critical care, and inpatient ward areas) or no defined pathway (incomplete or no segregation, areas shared with patients with COVID-19). The primary outcome was 30-day postoperative pulmonary complications (pneumonia, acute respiratory distress syndrome, unexpected ventilation). RESULTS Of 9,171 patients from 447 hospitals in 55 countries, 2,481 were operated on in COVID-19–free surgical pathways. Patients who underwent surgery within COVID-19–free surgical pathways were younger with fewer comorbidities than those in hospitals with no defined pathway but with similar proportions of major surgery. After adjustment, pulmonary complication rates were lower with COVID-19–free surgical pathways (2.2% v 4.9%; adjusted odds ratio [aOR], 0.62; 95% CI, 0.44 to 0.86). This was consistent in sensitivity analyses for low-risk patients (American Society of Anesthesiologists grade 1/2), propensity score–matched models, and patients with negative SARS-CoV-2 preoperative tests. The postoperative SARS-CoV-2 infection rate was also lower in COVID-19–free surgical pathways (2.1% v 3.6%; aOR, 0.53; 95% CI, 0.36 to 0.76). CONCLUSION Within available resources, dedicated COVID-19–free surgical pathways should be established to provide safe elective cancer surgery during current and before future SARS-CoV-2 outbreaks

Elective Cancer Surgery in COVID-19-Free Surgical Pathways During the SARS-CoV-2 Pandemic: An International, Multicenter, Comparative Cohort Study.

PURPOSE: As cancer surgery restarts after the first COVID-19 wave, health care providers urgently require data to determine where elective surgery is best performed. This study aimed to determine whether COVID-19-free surgical pathways were associated with lower postoperative pulmonary complication rates compared with hospitals with no defined pathway. PATIENTS AND METHODS: This international, multicenter cohort study included patients who underwent elective surgery for 10 solid cancer types without preoperative suspicion of SARS-CoV-2. Participating hospitals included patients from local emergence of SARS-CoV-2 until April 19, 2020. At the time of surgery, hospitals were defined as having a COVID-19-free surgical pathway (complete segregation of the operating theater, critical care, and inpatient ward areas) or no defined pathway (incomplete or no segregation, areas shared with patients with COVID-19). The primary outcome was 30-day postoperative pulmonary complications (pneumonia, acute respiratory distress syndrome, unexpected ventilation). RESULTS: Of 9,171 patients from 447 hospitals in 55 countries, 2,481 were operated on in COVID-19-free surgical pathways. Patients who underwent surgery within COVID-19-free surgical pathways were younger with fewer comorbidities than those in hospitals with no defined pathway but with similar proportions of major surgery. After adjustment, pulmonary complication rates were lower with COVID-19-free surgical pathways (2.2% v 4.9%; adjusted odds ratio [aOR], 0.62; 95% CI, 0.44 to 0.86). This was consistent in sensitivity analyses for low-risk patients (American Society of Anesthesiologists grade 1/2), propensity score-matched models, and patients with negative SARS-CoV-2 preoperative tests. The postoperative SARS-CoV-2 infection rate was also lower in COVID-19-free surgical pathways (2.1% v 3.6%; aOR, 0.53; 95% CI, 0.36 to 0.76). CONCLUSION: Within available resources, dedicated COVID-19-free surgical pathways should be established to provide safe elective cancer surgery during current and before future SARS-CoV-2 outbreaks